Roto rack for PJ 12
Рабочие характеристики
Calibration thermostatic bath with latest microprocessor technology and many functions for programming and information and installed cooling coil
Input either via cursor keys, numeric soft keys or both. Additional Tmax key for overtemperature
SelfCheck Assistant for system diagnosis
Low-level and adjustable over-temperature protection with acoustic alarm for use with flammable and non-flammable liquids
Option for upgrading with up to 2 interfaces (RS 232/485, Profibus, analogue or contact modules, Ethernet-USB module)
2-chamber construction for constant level in the thermostating chamber
For low temperatures an external cooling source is required
Back-lit graphic LCD display with high resolution and different display modes
Command console can be detached and used as remote control
Fully electronic continuous controller with PID action for internal & external control
LAUDA Varioflex pump (pressure) with 8 selectable levels
Programmer with 150 temperature/time segments that can be separated into 5 programs
Pump connectors on the side and in the back, installed bypass
Additional green LED display for temperature
EasyUse system for simple operation of the whole unit
PowerAdapt system for the use of the maximum possible amount of heat permitted by the power supply system
Optically decoupled RS 232/485 interface integrated as a standard
Timer function for switching on the thermostat, entering the standyby mode or running of programs
Bath from stainless steel (specially insulated for low-temperature work, with carrying handles and drain tap)
Рабочий диапазон
Рабочая температура, мин.
30 °C
Рабочая температура, макс.
200 °C
Постоянство температурного режима
0.01 ± K
Технические характеристики (согл. DIN 12876)
Диапазон рабочих температур
30 ... 200 °C
Диапазон рабочих температур с водяным охлаждением
20 ... 200 °C
Рабочий диапазон температур
-40 ... 200 °C
Диапазон температуры окружающей среды
5 ... 40 °C
Постоянство температурного режима
0.01 ± K
Теплопроизводительность, макс.
3.6 kW
Потребление тока
16 A
Потребляемая мощность, макс.
3.7 kW
Давление нагнетания, макс.
0,8 bar
Расход насоса, макс. (нагнетание)
25 L/min
Объем ванны, мин/макс.
8,5 / 13,5 L
Размеры (Ш × Г × В)
220 x 360 x 630 mm
Масса
19 kg
Питание от сети
230 V; 50/60 Hz
Сетевая вилка
Сетевой кабель с угловым штекером Schuko (CEE7/7)
